Posts

2018-2019-QuEST INGENIUM 2018- Emoto

Image
Top 10 Finalist of Quest Ingenium 2018 Project Title:Emoto This bike is totally powered by the electrical components. It consists of a controller to control the batteries, motors, throttle and some electrical components. Here the Lithium Ion batteries (48v) are used. There was an BLDC motor fixed In the rear wheel which was 48v and 500W. The feedback are taken from the wheels and continuously the power will generated and then it stored to   the batteries .so, that we can cross up to our limit. It reduces the air pollution and tends to form a green city. We can save the money spending for our daily uses. The power generate from the front hub wheel. The loading capacity of the bike was up to 230kg.we can improve the loading capacity and the speed depends up on their sources. At the speed of 30kmph we are generated 25.2V, if we can use the separate alternator to increase the volt up to us needs. It was a noise less and comfortable smooth drive.

2016-2017-FAER 2017 PUBLIC VEHICLE ACCESS SYSTEM FOR VISUALLY IMPAIRED USING NFC APPLICATION

Image
Winners of FAER – McAfee Scholar Awards Program : 2016-2017 Abstract In the past there have been similar research efforts to develop embedded systems to alleviate similar problems. The Talking Signs identification system consists of NFC transmitters incorporated in the destination panels of buses that transmit route information. Since, an NFC beam is highly directional, the visually challenged user must point the handheld receiver towards the transmitter. Hence, NFC technology is used. This project demonstrates the concept of bus detection system by the blind people using NFC. In which the blind people having NFC reader with PIC16F887A microcontroller module which gives the voice analyzer sound whenever the specific bus comes, the bus is equipped with NFC tag. Whenever bus comes at bus stop the blind person who is provided with NFC reader get signal as it reads tag. In our proposed project we are using PIC16F887A based microcontroller, which the current dominant microcontroller. N...

2016-NASSCOM IoT Innovation Challenge-Infant Healthcare Monitoring System-Akshaya College of Engg&Tech

Image
Winner of NASSCOM IoT Innovation Challenge Project Title: Infant Healthcare Monitoring System Abstract In Real Time current procedures for Infants and Neonates patient monitoring in India with special attention for individual become uphill task for Each and Every Physician in a medical Centre. Moreover the less attention and less periodical monitoring of INFANTS generate the poor latency in the field of healthcare. This also causes more deaths due to delayed diagnosis of disease for infants in the health care domain. The gifted technology called IOT is a complete solution of the above stated problem. This device is especially designed and developed for Infant and Neonate ICU’s. In health care domain deaths due to delayed diagnosis of disease for infants and Neonates become accountable. In the Area of Health care monitoring system, dedicated Infant Patient Monitoring with IOT enabled devices are not available. To overcome this scenario, dedicated devices for Infan...

2018-QuEST Ingenium 2018-INTELLIGENT FUEL MONITORING SYSTEM WITH ADULTERATION DETECTOR-AKSHAYA COLLEGE OF ENGINEERING AND TECHNOLOGY

QuEST Ingenium 2018 TOP 100 Projects:  INTELLIGENT FUEL MONITORING SYSTEM WITH ADULTERATION DETECTOR- Akshaya College of Engineering and Technology   Transportation plays a predominant role in our daily life. Everyone owns a vehicle for their own transportation and there is a huge need of fuel. This causes the fuel organisers to deceive the society. In order to avoid such consequences this project will be helpful to the society for fuel consumption and preventing forgeries. This fuel monitoring system includes the adulteration detector which measures the density of the adulterants (like oil, kerosene, diesel etc.,). The chemical composition sensor will detect the unwanted materials that is present in the fuel except petrol and oil .Pollution that is present can also be detected. The level of the fuel can be detected using the fuel level detector. In LCD display the initial and final level of the fuel is displayed and the speed can also be measured accordingly. The densi...

2018-AICTE-ECI-ISTE Chhatra Vishwakarma Awards -Automatic bin collector using line follower robot for villages

AICTE-ECI-ISTE Chhatra Vishwakarma Awards Empowerment of Villages through Technologies Project:  Automatic bin collector using line follower robot for villages In current scenario, the waste in the dustbin is collected with the help of workers. At some places it is not noticed by the workers.Due to that many disease spreads over the society and even the workers who cleans that will also get cautious diseases and that sometimes leads to death. So with the help of the proposed project the spreading of disease through overflow of dustbin could be prevented.      In order to overcome that automatic bin collecting using line follower robot is proposed.  It is             helpful to reduce the labors work and to prevent the society from disease which is caused by              overflow of waste. The dustbin will automatically sense the amount of waste that has and sends    ...

2017-2018-Akshaya College of Engineering and Technology-IEC-HYGIENE MONITORING SYSTEM IN TOILETS USING IOT-iicdc 2017

Image
Smart hygiene monitoring system in Toilets is a maintenance free technology that consists of People Density Counter and air quality Sensor. Data collected with analytics provide predictive cleaning and inventory usage. This technology improves productivity of cleaning companies. Data collected with analytics provide predictive inventory usage. This technology is expected to improve the productivity of cleaning companies. Technologies that count the number of user going past the toilet's main door and ammonia sensors.         This system is expected to improve the productivity of cleaning companies by up to 50 percent. Toilets are usually cleaned at regular intervals, regardless of the number of times the toilet is used.   The feedback button installed in the Toilet enables the user to provide alert on dirty toilets.   It maintains the sanitation and prevents diseases which can cause illness and death.

Akshaya College of Engineering and Technology-IEC-RFID BASED MISSING WEAPONS MONITORING REPORTING ROBOT WITH REAL TIME BIDIRECTIONAL WIRELESS DATA TRANSFER-IICDC 2017

Image
In a military unit all the weapons are generally stored in a large barrack type arrangement which is a big hall containing all weapons and ammunitions. Monitoring this place continuously is of utmost importance. Both during peace time and war time the weapons storage facility is continuously monitored to ensure that no weapons go missing. This process of checking whether weapons are missing is a tedious and a time consuming work and is also prone to human errors and mistakes.   The microcontroller on the robot is programmed to scan the entire location. So when the robot is placed in the room and turned on, it automatically moves through every part of the room. While the robot is passing through the room, it picks up the details of the RFID tags attached on the weapons. So as it moves it collects information of the weapons that are present in the room. This information is transmitted as and when it is collected to a central monitoring in such as a PC.   For viewing the...